Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2013SEQUOIA 4WD V8-5.7L (3UR-FE)REPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSENGINE OIL
2013 Toyota Sequoia 4WD V8-5.7L (3UR-FE)
Engine Oil
2013 Toyota Sequoia 4WD V8-5.7L (3UR-FE)SECTION Engine Oil
Engine Oil Capacity (Drain and refill-reference*)
With filter 7.9 qt (7.5L)
Without filter 7.5 qt (7.1L)
*The engine oil capacity is a reference quantity to be used when exchanging. Warm up and turn off engine, wait more than 5 minutes. and check the oil level on the dipstick.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.