Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Smart Key Specifications (T-SB-0033-13)
Reference number: T-SB-0033-13
SMART KEY SPECIFICATIONS
TECHNICAL SERVICE BULLETIN
| TOYOTA: | 2010 - 2013 4Runner; 2013 Avalon HV; 2009 - 2013 Avalon, Camry, Camry HV, Highlander, Venza; 2008 - 2013 Highlander HV, Prius, RAV4; 2009 - 2011, 2013 Land Cruiser; 2012 - 2013 Prius C, Prius V, RAV4 EV; 2010, 2012 - 2013 Prius PHV; 2011 - 2013 Sienna |
| SERVICE CATEGORY: | Vehicle Interior |
| SECTION: | Theft Deterrent/Keyless Entry |
| COPYRIGHT: | © 2018 Toyota, USA License Agreement TMS1002 |
APPLICABILITY
| YEAR(S) | MODEL(S) | ADDITIONAL INFORMATION |
|---|---|---|
| 2010 - 2013 | 4Runner | |
| 2013 | Avalon HV | |
| 2009 - 2013 | Avalon, Camry, Camry HV, Highlander, Venza | |
| 2008 - 2013 | Highlander HV, Prius, RAV4 | |
| 2009 - 2011, 2013 | Land Cruiser | |
| 2012 - 2013 | Prius C, Prius V, RAV4 EV | |
| 2010, 2012 - 2013 | Prius PHV | |
| 2011 - 2013 | Sienna |
INTRODUCTION
Some customers may inquire about the frequency and power output of the SmartKey/Smart Entry systems used on various models. The Smart Key/Smart Entry systems conform to all applicable FCC rules. This bulletin details the applicable specifications for these systems.
If necessary, details on disabling the Smart Key/Smart Entry functions can be found in the appropriate vehicle Repair Manual. Refer to the Technical Information System (TIS) for additional details.
WARRANTY INFORMATION
| OP CODE | DESCRIPTION | TIME | OFP | T1 | T2 |
|---|---|---|---|---|---|
| N/A | Not Applicable to Warranty | - | - | - | - |
SMART KEY DETECTION AREA
SPECIFICATIONS: SMART KEY ANTENNA (COMMUNICATION FROM VEHICLE TO KEY)
- Frequency: 134.2 kHz
- Power Output: 95dB μV/m (at 3 meters away from the Smart Key Antenna)
- Smart Antenna RF Output Power
| SPECIFICATIONS | ||||
|---|---|---|---|---|
| LOCATION | FREQUENCY | OUTPUT POWER/ELECTRIC FIELD INTENSITY | MODULATION METHOD | MOUNTING POINT IN VEHICLE |
| Inside Passenger Compartment | 134.2 kHz | 95dB μV/m @3 m | AM | Differs in each vehicle; consult the relevant Repair Manual for each vehicle |
| Inside Trunk (ONLY in Vehicles with Trunk) | Inside Trunk | |||
| Outside Vehicle |
|
|||
| TRANSMIT TIMING | |||
|---|---|---|---|
| LOCATION | VEHICLE PARKED | ENTERING OR EXITING VEHICLE | VEHICLE IS BEING DRIVEN |
| Inside Passenger Compartment | Does NOT Transmit |
|
When key is NOT detected inside passenger compartment while car is being driven (transmits for 3 seconds) |
| Inside Trunk (ONLY in Vehicles w/Trunk) | During the following operations:
|
Does NOT Transmit | |
| Outside Vehicle |
|
|
|
SPECIFICATIONS: SMART KEY TRANSMITTER/WIRELESS REMOTE (COMMUNICATION FROM KEY TO VEHICLE)
| SPECIFICATION | ||||
|---|---|---|---|---|
| MODEL | MODEL YEAR | FREQUENCY | OUTPUT POWER/ELECTRIC FIELD INTENSITY | MODULATION METHOD |
| Prius | 2008 - 2009 | 312.15 MHz | 80dB μV/m @3 m | AM |
| Avalon | 2009 - 2012 | 312.15 MHz 314.35 MHz |
81dB μV/m @3 m | |
| Camry | 2009 - 2011 | |||
| Camry HV | ||||
| Highlander | 2009 - 2013 | |||
| Highlander HV | 2008 - 2013 | |||
| Land Cruiser | 2009 - 2013 | |||
| RAV4 | 2008 - 2012 | |||
| 4Runner | 2010 - 2013 | 312.15 MHz 314.35 MHz |
75dB μV/m @3 m | FM |
| Avalon | 2013 | |||
| Avalon HV | ||||
| Camry | 2012 - 2013 | |||
| Camry HV | ||||
| Prius | 2010 - 2013 | |||
| Prius C | 2012 - 2013 | |||
| Prius PHV | 2010 - 2013 | |||
| Prius V | 2012 - 2013 | |||
| RAV4 | 2013 | |||
| RAV4 EV | 2012 - 2013 | |||
| Sienna | 2011 - 2013 | |||
| Venza | 2009 - 2013 | |||
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.