Fail-Safe Chart

2013 Toyota Avalon XLESECTION Fail-Safe Chart
  1. FAIL SAFE FUNCTION 
    1. The following chart shows the status of the controls when the system is normal and malfunctioning.
      • The passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, then goes off for approximately 2 seconds.
      • Approximately 6 seconds after the engine switch is turned on (IG), the passenger airbag ON/OFF indicator will indicate ON or OFF depending on the conditions listed below.
      Condition ON Indicator OFF Indicator Front Passenger Airbag Front Passenger Side Knee Airbag Front Seat Side Airbag RH Curtain Shield Airbag RH Front Seat Belt Pretensioner RH
      Adult is seated ON OFF
      Child is seated OFF ON X X
      Child restraint system is installed OFF ON X X
      Vacant OFF ON X X
      Failure OFF ON X X
      • ◦: Deployable
      • X: Not deployable
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.