Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011MATRIX AWD L4-2.4L (2AZ-FE)REPAIR AND DIAGNOSISBODY AND FRAMEMIRRORSSERVICE AND REPAIRINNER REAR VIEW MIRRORREMOVAL
2011 Toyota Matrix AWD L4-2.4L (2AZ-FE)
Removal
2011 Toyota Matrix AWD L4-2.4L (2AZ-FE)SECTION Removal
MIRROR (INT): INNER REAR VIEW MIRROR: REMOVAL
1. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
(a) Using a "TORX" socket wrench (T20), remove the screw.
(b) Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration to remove it.
2. REMOVE INNER REAR VIEW MIRROR COVER (w/ EC Mirror)
(a) Disengage the 2 claws and slide the inner rear view mirror cover in the direction indicated by the arrow shown in the illustration.
(b) Disengage the 6 claws and remove the inner rear view mirror cover.
3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
(a) Disconnect the connector.
(b) Using a "TORX" socket wrench (T20), remove the screw and the inner rear view mirror.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.