Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011LANDCRUISER V8-5.7L (3UR-FE)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSPOWER WINDOW SWITCHSERVICE AND REPAIRREAR POWER WINDOW SWITCHREMOVAL
2011 Toyota Landcruiser V8-5.7L (3UR-FE)
Removal
2011 Toyota Landcruiser V8-5.7L (3UR-FE)SECTION Removal
WINDOW / GLASS: REAR POWER WINDOW SWITCH: REMOVAL
HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.
1. REMOVE REAR DOOR ARMREST BASE PANEL ASSEMBLY
(a) Using a moulding remover, detach the 7 claws.
(b) Disconnect the connector and remove the armrest base panel.
2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Detach the 2 claws and remove the regulator switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.