Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011LANDCRUISER V8-5.7L (3UR-FE)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYSERVICE AND REPAIRREMOVAL AND REPLACEMENTAIR CONDITIONING PANEL (W/O MULTI-DISPLAY)INSTALLATION
2011 Toyota Landcruiser V8-5.7L (3UR-FE)
Installation
2011 Toyota Landcruiser V8-5.7L (3UR-FE)SECTION Installation
HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL (w/o Multi-display): INSTALLATION
1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
(a) Connect the connectors.
(b) Insert the radio receiver and attach the 5 claws on its backside.
NOTICE:
When inserting the radio receiver, do not press the knobs on it.
2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
3. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Installation
4. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION Installation
5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Installation
6. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION Installation
7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET Installation
8. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
9. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
10. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.