Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011LANDCRUISER V8-5.7L (3UR-FE)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSTRUNK / LIFTGATE LOCKSERVICE AND REPAIRINSTALLATION
2011 Toyota Landcruiser V8-5.7L (3UR-FE)
Installation
2011 Toyota Landcruiser V8-5.7L (3UR-FE)SECTION Installation
DOOR LOCK: BACK DOOR LOCK: INSTALLATION
1. INSTALL BACK DOOR LOCK ASSEMBLY
(a) Install the door lock with the 3 bolts.
Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)
(b) Connect the connector.
2. INSTALL BACK DOOR LOCK COVER
(a) Attach the 4 claws to install the cover.
3. INSTALL BACK DOOR GARNISH
4. INSTALL BACK DOOR SIDE GARNISH RH
5. INSTALL BACK DOOR SIDE GARNISH LH
6. INSTALL CENTER BACK DOOR GARNISH
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.