SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011LANDCRUISER V8-5.7L (3UR-FE)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTNAVIGATION SYSTEMTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESTOUCH PANEL SWITCH DOES NOT FUNCTION
2011 Toyota Landcruiser V8-5.7L (3UR-FE)

Touch Panel Switch Does Not Function

2011 Toyota Landcruiser V8-5.7L (3UR-FE)SECTION Touch Panel Switch Does Not Function




NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Touch Panel Switch does not Function
- Touch Panel Switch does not Function

INSPECTION PROCEDURE

PROCEDURE

1. CHECK TOUCH PANEL

(a) Check for foreign matter on the display.

OK:

The display is clean.

NG -- CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK -- Continue to next step.

2. CHECK TOUCH SWITCH (OPERATION CHECK)

(a) Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check Operation Check.





(b) Touch the display in the area where the switch malfunction occurs.

OK:

A "+" mark appears at the touched position.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures

OK -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Removal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.