Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011LANDCRUISER V8-5.7L (3UR-FE)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTNAVIGATION SYSTEMNAVIGATION MODULESERVICE AND REPAIRREMOVAL
2011 Toyota Landcruiser V8-5.7L (3UR-FE)
Removal
2011 Toyota Landcruiser V8-5.7L (3UR-FE)SECTION Removal
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
2. REMOVE INSTRUMENT SIDE PANEL RH Removal
3. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
5. REMOVE FRONT DOOR SCUFF PLATE RH Removal
6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
7. REMOVE INSTRUMENT PANEL BOX DOOR KNOB Removal
8. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL Removal
9. REMOVE NAVIGATION MODULE BOARD WITH DISC PLAYER BRACKET
(a) Detach the clamp.
(b) Remove the 2 screws and nut.
(c) Disconnect the navigation module board connectors and remove the navigation module board with disc player bracket.
10. REMOVE NO. 2 DISC PLAYER BRACKET
(a) Remove the 2 screws and bracket.
11. REMOVE NO. 1 DISC PLAYER BRACKET
(a) Remove the 2 screws and bracket.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.