ABS Control System Malfunction - Vehicle Stability Control System

2011 Toyota Landcruiser V8-5.7L (3UR-FE)SECTION ABS Control System Malfunction - Vehicle Stability Control System




BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: C1223/43: ABS Control System Malfunction
C1223/43 - ABS Control System Malfunction

DESCRIPTION





HINT
* This DTC is stored when the VSC system detects a malfunction in the ABS system.
* When DTC C1223/43 is stored, there is no malfunction in the skid control ECU.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC (FOR ABS SYSTEM)

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Check if ABS DTCs are output Reading and Clearing Diagnostic Trouble Codes.

Result





B -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting

A -- REPAIR CIRCUIT INDICATED BY OUTPUT DTC Vehicle Stability Control System
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.