Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011FJ CRUISER 2WD V6-4.0L (1GR-FE)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSWINDOW REGULATORTESTING AND INSPECTIONINSPECTION
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)
Inspection
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)SECTION Inspection
WINDSHIELD / WINDOW GLASS: POWER WINDOW REGULATOR MOTOR: INSPECTION
1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(a) Check the operation of the regulator motor.
(1) Apply battery voltage to the regulator motor and check the operation of the regulator motor.
Standard:
If the result is not as specified, replace the power window regulator motor.
2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
(a) Check the operation of the regulator motor.
(1) Apply battery voltage to the regulator motor and check the operation of the regulator motor.
Standard:
If the result is not as specified, replace the power window regulator motor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.