SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011FJ CRUISER 2WD V6-4.0L (1GR-FE)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSPOWER WINDOW SWITCHTESTING AND INSPECTIONPOWER WINDOW MASTER SWITCH
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)

Power Window Master Switch

2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)SECTION Power Window Master Switch




WINDSHIELD / WINDOW GLASS: POWER WINDOW MASTER SWITCH: INSPECTION

1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

(a) Check the resistance.





(1) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

Standard Resistance:

Driver switch






If the result is not as specified, replace the power window regulator master switch.

Standard Resistance:

Passenger side switch






If the result is not as specified, replace the power window regulator master switch.

(b) Check the illumination operation.

(1) Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

Standard:





If the result is not as specified, replace the power window regulator master switch.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.