Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011FJ CRUISER 2WD V6-4.0L (1GR-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING CHAIN TENSIONER
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)
Timing Chain Tensioner
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)SECTION Timing Chain Tensioner
NO. 1 CHAIN TENSIONER ASSEMBLY
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)
NO. 2 CHAIN TENSIONER ASSEMBLY (for Bank 1)
Torque 21 Nm (214 kgf-cm, 15 ft-lbf)
NO. 3 CHAIN TENSIONER ASSEMBLY (for Bank 2)
Torque 21 Nm (214 kgf-cm, 15 ft-lbf)
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)
NO. 2 CHAIN TENSIONER ASSEMBLY (for Bank 1)
Torque 21 Nm (214 kgf-cm, 15 ft-lbf)
NO. 3 CHAIN TENSIONER ASSEMBLY (for Bank 2)
Torque 21 Nm (214 kgf-cm, 15 ft-lbf)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.