SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011FJ CRUISER 2WD V6-4.0L (1GR-FE)REPAIR AND DIAGNOSISMAINTENANCESERVICE AND REPAIRBRAKE - GENERAL MAINTENANCE
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)

Brake - General Maintenance

2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)SECTION Brake - General Maintenance




MAINTENANCE: BRAKE: GENERAL MAINTENANCE

1. INSPECT BRAKE LINE PIPES AND HOSES

HINT
Check in a well lighted area. Check the entire circumference and length of the brake hoses using a mirror as necessary. Turn the front wheels fully right or left before checking the front brakes.





(a) Check all brake lines and hoses for:

* Damage

* Wear

* Deformation

* Cracks

* Corrosion

* Leaks

* Bends

* Twists

(b) Check all clamps for tightness and connections for leakage.

(c) Check that the hoses and lines are clear of sharp edges, moving parts and the exhaust system.

(d) Check that the lines installed in the grommets pass through the center of the grommets.

2. INSPECT FRONT BRAKE

(a) Check the front brake pads and discs Front Brake.

3. INSPECT REAR BRAKE

(a) Check the rear brake pads and discs Rear Brake.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.