Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2011FJ CRUISER 2WD V6-4.0L (1GR-FE)REPAIR AND DIAGNOSISLIGHTING AND HORNSTESTING AND INSPECTIONPROGRAMMING AND RELEARNING
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)
Programming and Relearning
2011 Toyota FJ Cruiser 2WD V6-4.0L (1GR-FE)SECTION Programming and Relearning
LIGHTING: LIGHTING SYSTEM: CUSTOMIZE PARAMETERS
1. CUSTOMIZE LIGHTING SYSTEM
HINT
The following items can be customized.
CAUTION:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Record the current settings before customizing.
(a) Customizing with the Techstream tester.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Utility / Customize / Illuminated Entry or Light Control.
(5) Select the setting by referring to the table below.
Illuminated Entry
Light Control
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.