Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA20104 RUNNER 2WD L4-2.7L (2TR-FE)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTCOLLISION AVOIDANCE AND PARKING ASSIST SYSTEMSTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESREAR VIEW MONITOR SYSTEM (W/ NAVIGATION SYSTEM)
2010 Toyota 4 Runner 2WD L4-2.7L (2TR-FE)
Rear View Monitor System (w/ Navigation System)
2010 Toyota 4 Runner 2WD L4-2.7L (2TR-FE)SECTION Rear View Monitor System (w/ Navigation System)
PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/ Navigation System): PROBLEM SYMPTOMS TABLE
HINT
* Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
* Inspect the fuses and relays related to this system before inspecting the suspected areas below.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.