Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA2009YARIS S, 4D HATCHBACKREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYENGINE FUEL SYSTEMFUEL INJECTORINSTALLATION

2009 Toyota Yaris S, 4D Hatchback

Fuel Injector: Installation

2009 Toyota Yaris S, 4D HatchbackSECTION Installation

INSTALL FUEL INJECTOR ASSEMBLY
1. Apply a light coat of gasoline or spindle oil to new O-rings, then install one onto each fuel injector.
2. Apply a light coat of gasoline or spindle oil to the contact surfaces of the fuel delivery pipe and the O-ring of the fuel injector.
  
  Fig 1: Identifying O-Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. While turning the fuel injector left and right, install it onto the fuel delivery pipe.
  NOTE:
  - Do not twist the O-ring.
  - After installing the fuel injectors, check that they turn smoothly. If not, replace the O-ring with a new one.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.