SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2009YARIS L4-1.5L (1NZ-FE)REPAIR AND DIAGNOSISBODY AND FRAMEBUMPERFRONT BUMPERSERVICE AND REPAIRFRONT BUMPER (FOR HATCHBACK)REASSEMBLY
2009 Toyota Yaris L4-1.5L (1NZ-FE)

Reassembly

2009 Toyota Yaris L4-1.5L (1NZ-FE)SECTION Reassembly







EXTERIOR: FRONT BUMPER (for Hatchback): REASSEMBLY

REASSEMBLY

1. INSTALL FRONT BUMPER HOLE COVER





(a) Engage the 3 claws and install the front bumper hole cover.
2. INSTALL FOG LIGHT COVER LH





(a) Engage the 5 claws and install the fog light cover.
3. INSTALL FOG LIGHT COVER RH
HINT: Use the same procedure as for the LH side.

4. INSTALL FOG LIGHT ASSEMBLY LH





(a) Install the fog light with the 2 screws.
5. INSTALL FOG LIGHT ASSEMBLY RH
HINT: Use the same procedure as for the LH side.

6. INSTALL RADIATOR LOWER GRILLE





(a) Engage the 12 claws and install the radiator lower grille.
7. INSTALL RADIATOR GRILLE





(a) Engage the 14 claws and install the radiator grille.
8. INSTALL RADIATOR GRILLE EMBLEM Installation
9. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET





(a) Install the front bumper extension mounting bracket with the 2 bolts.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.