Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA2009YARIS BASE, 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEM (1NZ-FE)ACCELERATOR PEDALINSTALLATION

2009 Toyota Yaris Base, 4D Sedan, Automatic

Accelerator Pedal: Installation

2009 Toyota Yaris Base, 4D Sedan, AutomaticSECTION Installation

NOTE:

Avoid any physical shock to the accelerator pedal.
Do not disassemble the accelerator pedal.

Fig 1: Locating Accelerator Pedal Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL ACCELERATOR PEDAL ASSEMBLY
1. Install the accelerator pedal with the 2 bolts.
  Torque: 10 N*m (102 kgf*cm, 7.4 ft.*lbf)
2. Connect the accelerator pedal connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 2: Locating Accelerator Pedal Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.