STEREO JACK ADAPTER ASSEMBLY (for Sedan): Installation

2009 Toyota Yaris Base, 4D Sedan, AutomaticSECTION Installation
  1. INSTALL STEREO JACK ADAPTER ASSEMBLY 
    1. Connect the stereo jack adapter connector.
    2. Engage the 2 claws and install the stereo jack adapter.
    3. Fig 1: Locating Stereo Jack Adapter Connector
      G04833640Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT LOWER PAD  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL FINISH PANEL END  (See INSTALLATION )
  4. INSTALL REAR CONSOLE BOX ASSEMBLY  (See INSTALLATION )
  5. INSTALL REAR CONSOLE BOX CARPET  (See INSTALLATION )
  6. INSTALL REAR CONSOLE BOX UPPER REAR PANEL SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL REAR CONSOLE BOX UPPER PANEL SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL  (See INSTALLATION )
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.