Cruise Control: Service Precautions

CRUISE CONTROL: CRUISE CONTROL SYSTEM: PRECAUTION

PRECAUTION
NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.





1. HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM
(a) Turn the cruise control main switch off when not using the cruise control system.
(b) Be careful as the vehicle speed increases when driving downhill with the cruise control system on.
(c) The + RES operation changes according to the cruise control system status. When the cruise control system is operating, the + function operates. When the cruise control system is not operating, the RES function operates.
(d) If the CRUISE main indicator light blinks while the cruise control system is operating, turn the cruise control main switch off to reset the cruise control system. After the reset, if the cruise control main switch cannot be turned on, or the cruise control system is canceled immediately after turning the cruise control main switch on, the system may have a malfunction.
(e) Do not use the cruise control system where the road conditions are as follows:
- Heavy traffic
- Steep decline
- Roads with sharp turns
- Icy or snowy roads
- Slippery roads

(f) Do not use the cruise control system while towing.
2. EXPRESSION OF IGNITION SWITCH
HINT: The type of ignition switch used on this model differs according to the specifications of the vehicle.
The expressions listed in the table below are used in this section.