Problem Symptoms Table

2009 Toyota Sequoia Limited, 5.7 Y, RWDSECTION Problem Symptoms Table

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Intuitive Parking Assist System 

INTUITIVE PARKING ASSIST SYSTEM

Symptom Suspected Area Reference
System does not operate at all (Initial check function also does not operate) Proceed to "Clearance Warning ECU Power Source Circuit" CLEARANCE WARNING ECU POWER SOURCE CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Clearance warning indicator indicates front clearance sonar sensor is frozen Clean the sensor surface INTUITIVE PARKING ASSIST SYSTEM 
Proceed to "Front Clearance Sonar Sensor LH Circuit" FRONT CLEARANCE SONAR SENSOR LH CIRCUIT 
Proceed to "Front Clearance Sonar Sensor RH Circuit" FRONT CLEARANCE SONAR SENSOR RH CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Clearance warning indicator indicates rear clearance sonar sensor is frozen Clean the sensor surface INTUITIVE PARKING ASSIST SYSTEM 
Proceed to "Rear Clearance Sonar Sensor LH Circuit" REAR CLEARANCE SONAR SENSOR LH CIRCUIT 
Proceed to "Rear Clearance Sonar Sensor RH Circuit" REAR CLEARANCE SONAR SENSOR RH CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Clearance warning indicator indicates back sonar sensor is frozen Clean the sensor surface INTUITIVE PARKING ASSIST SYSTEM 
Proceed to "Back Sonar Sensor LH Circuit" BACK SONAR SENSOR LH CIRCUIT 
Proceed to "Back Sonar Sensor RH Circuit" BACK SONAR SENSOR RH CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Clearance warning indicator indicates open in rear clearance sonar sensor circuit Proceed to "Rear Clearance Sonar Sensor RH Circuit" REAR CLEARANCE SONAR SENSOR RH CIRCUIT 
Proceed to "Back Sonar Sensor RH Circuit" BACK SONAR SENSOR RH CIRCUIT 
Proceed to "Back Sonar Sensor LH Circuit" BACK SONAR SENSOR LH CIRCUIT 
Proceed to "Rear Clearance Sonar Sensor LH Circuit" REAR CLEARANCE SONAR SENSOR LH CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Clearance warning indicator indicates open in front clearance sonar sensor circuit Proceed to "Front Clearance Sonar Sensor LH Circuit" FRONT CLEARANCE SONAR SENSOR LH CIRCUIT 
Proceed to "Front Clearance Sonar Sensor RH Circuit" FRONT CLEARANCE SONAR SENSOR RH CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
System operates even when vehicle speed is 10 km/h (6.2 mph) or more Proceed to "Vehicle Speed Signal Circuit" VEHICLE SPEED SIGNAL CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Although system operates, indicator does not illuminate Proceed to "Indicator Circuit" INDICATOR CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Indicator does not dim at night, or illuminates dimly during daytime Proceed to "Taillight Relay Circuit" TAILLIGHT RELAY CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Although system operates, clearance warning buzzer does not sound Proceed to "Clearance Warning Buzzer Circuit" CLEARANCE WARNING BUZZER CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
Clearance warning buzzer volume is low Adjust volume ADJUSTMENT 
Clearance warning ECU CLEARANCE WARNING ECU 
Rear corner and back sonar operates when shift lever is not in R, or does not operate even when shift lever is in R Proceed to "Park/Neutral Position Switch Circuit" PARK / NEUTRAL POSITION SWITCH CIRCUIT 
Clearance warning ECU CLEARANCE WARNING ECU 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.