SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2009SEQUOIA 4WD V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISLIGHTING AND HORNSTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGINTERIOR LIGHTING SYSTEM
2009 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)

Interior Lighting System

2009 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)SECTION Interior Lighting System







LIGHTING (INT): LIGHTING SYSTEM: CUSTOMIZE PARAMETERS

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT: The following items can be customized.

NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting / illuminated Entry or Light Control.
(e) Select the setting by referring to the table below.

Illuminated Entry





Light Control





HINT: *1: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*1





*2





*3




RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.