Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2009CAMRY HYBRIDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROL SYSTEM (HYBRID)ENGINE COOLANT TEMPERATURE SENSORINSTALLATION
2009 Toyota Camry Hybrid
Engine Coolant Temperature Sensor: Installation
2009 Toyota Camry HybridSECTION Installation
- INSTALL ENGINE COOLANT TEMPERATURE SENSOR
- Install a new gasket onto the engine coolant temperature sensor.
- Using SST, install the engine coolant temperature sensor.
SST 09817-33190
Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
- Connect the engine coolant temperature sensor connector.
- INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION )
- INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
- INSTALL AIR CLEANER INLET ASSEMBLY (See INSTALLATION )
- ADD COOLANT (for Engine) (See COOLANT (FOR ENGINE) )
- INSPECT FOR COOLANT LEAK (for Engine) (See ON-VEHICLE INSPECTION )
- INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.