Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2009CAMRY HYBRIDREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSDOOR LOCK (HYBRID)SMART KEY SYSTEMDTC CHECK / CLEAR
2009 Toyota Camry Hybrid
DTC Check / Clear
2009 Toyota Camry HybridSECTION DTC Check / Clear
- CHECK DTC
- Connect Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the tester on.
- Enter the following menu items: Body Electrical / Smart Key / Trouble Codes.
- Check the details of the DTC (s) (See DIAGNOSTIC TROUBLE CODE CHART ).
- CLEAR DTC
- Connect Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the tester on.
- Enter the following menu items: Body Electrical / Smart Key / Trouble Codes.
- Erase the DTCs.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.