SYS.OK|MANUAL.DB● LIVE
2009 Toyota 4Runner Limited, 4.0 U, 4WD

Quick Lookups: Fluids

2009 Toyota 4Runner Limited, 4.0 U, 4WDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.00 OZS. 0.14 L PAG 46 S
Air Cond Refrigerant 1.30 LBS. 0.58 KG R-134a S
Automatic Transmission Fluid 10.90 QTS. 10.31 L TOYOTA Genuine Automatic Transmission Fluid Type WS The fluid capacity is the quantity of reference. S
Brake Fluid N/A N/A SAE J1703 or FMVSS No. 116 DOT 3 S
Differential Gear Oil 4WD Front,w/Automatic Disconnecting Differential 1.60 QTS. 1.51 L TOYOTA Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent S
Differential Gear Oil 4WD Front,w/o Automatic Disconnect Differential 1.50 QTS. 1.41 L TOYOTA Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent S
Differential Gear Oil w/o Rear Differential Lock 3.20 QTS. 3.02 L TOYOTA Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent S
Differential Gear Oil w/Rear Differential Lock 3.10 QTS. 2.93 L TOYOTA Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent S
Engine Coolant 4.0L Eng 10.40 QTS. 9.84 L TOYOTA Super Long Life Coolant or equivalent DO NOT use plain water alone. S
Engine Oil 4.0L Eng Drain and Refill,w/Filter 5.50 QTS. 5.2 L ILSAC GF-4 SAE 5W-30 S
Engine Oil 4.0L Eng Drain and Refill,w/o Filter 5.20 QTS. 4.92 L ILSAC GF-4 SAE 5W-30 S
Fuel Tank 23.00 GALS. 87.06 L S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON II or DEXRON III S
Transfer Case Fluid 1.50 QTS. 1.41 L API - GL-4 or GL-5, SAE 75W-90 S
Windshield Washer Fluid N/A N/A Plain water In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. Not radiator antifreeze. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.