DTC B1499/99: Multiplex Communication Circuit: Procedure

2008 Toyota Yaris S, 4D Sedan, AutomaticSECTION Procedure
WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DIAGNOSTIC TROUBLE CODE (DTC B1499/99)Β 
    1. Clear the DTC. Refer to DTC CHECK / CLEAR .
    2. Read the DTC. Refer to DTC CHECK / CLEAR .

      Result

      Result Proceed to
      DTC (B1499/99) is not output A
      DTC (B1499/99) is output B

    B β†’ GO TO Β MULTIPLEX COMMUNICATION SYSTEMΒ 

    A β†’ SYSTEM OKΒ 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.