Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2008RAV4 LIMITED, 2.4 D, FWDREPAIR AND DIAGNOSISGENERAL INFORMATIONOEM GENERAL INFORMATIONSERVICE SPECIFICATIONS2GR-FE ENGINE LUBRICATION SYSTEMSERVICE DATA
2008 Toyota RAV4 Limited, 2.4 D, FWD
Service Data
2008 Toyota RAV4 Limited, 2.4 D, FWDSECTION Service Data
SERVICE DATA
| Oil pressure | Idle | 80 kPa (0.8 kgf/cm2 , 11.6 psi) or more | |
| 6,000 rpm | 380 kPa (3.9 kgf/cm2 , 55.5 psi) or more | ||
| Oil pump | Tip clearance | Standard | 0.060 to 0.160 mm (0.0024 to 0.0063 in.) |
| Maximum | 0.16 mm (0.0063 in.) | ||
| Body clearance | Standard | 0.250 to 0.325 mm (0.0098 to 0.0128 in.) | |
| Maximum | 0.325 mm (0.0128 in.) | ||
| Side clearance | Standard | 0.030 to 0.090 mm (0.0012 to 0.0035 in.) | |
| Maximum | 0.090 mm (0.0035 in.) | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.