Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA2008RAV4 LIMITED, 2.4 D, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESMECHANICAL - HYDRAULICBRAKE SYSTEM (SERVICE SPECIFICATIONS)BRAKE SYSTEMSERVICE DATA (2006/01- )BRAKE PEDAL

2008 Toyota RAV4 Limited, 2.4 D, FWD

Brake Pedal

2008 Toyota RAV4 Limited, 2.4 D, FWDSECTION Brake Pedal

BRAKE PEDAL SPECIFICATION

Brake pedal height from dash panel	184.2 to 194.2 mm (7.252 to 7.646 in.)
Stop light switch clearance	1.5 to 2.5 mm (0.059 to 0.098 in.)
Brake pedal free play	1.0 to 6.0 mm (0.039 to 0.236 in.)
Brake pedal reserve distance from dash panel	See the table below.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.