Inspection Procedure

2008 Toyota RAV4 Limited, 2.4 D, FWDSECTION Inspection Procedure
  1. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY 
    1. Turn the window lock switch OFF and operate the switches on the master switch. Check that the remote UP / DOWN function operates normally.

      OK: 

      Remote UP / DOWN function operates normally. 

      Fig 1: Identifying Power Window Regulator Master Switch
      G04981059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    OK: END 

    NG: Go to Next Step 

  2. CHECK MANUAL UP / DOWN FUNCTION 
    1. Check that the passenger door power window and rear door power window manual UP / DOWN function operates normally.

      OK: 

      Manual UP / DOWN function operates normally. 

    NG: OTHER PROBLEM 

    OK: REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.