Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2008RAV4 4WD V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COMPONENTSTIMING COVER
2008 Toyota RAV4 4WD V6-3.5L (2GR-FE)
Timing Cover
2008 Toyota RAV4 4WD V6-3.5L (2GR-FE)SECTION Timing Cover
TIMING COVER
Bolt length:
40 mm (1.57 in.) for bolt A
55 mm (2.17 in.) for bolt B
25 mm (0.98 in.) for bolt C
Tighten the bolts in this order: Area 1, Area 2, Area 3, Area 4.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf) for Area 1, 2 bolt
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf) for Area 3 bolt, nut
Torque: 43 Nm (438 kgf-cm, 32 ft-lbf) for Area 4 bolt A
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf) for Area 4 except bolt A
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.