Reassembly

2008 Toyota RAV4 4WD V6-3.5L (2GR-FE)SECTION Reassembly







INSTRUMENT PANEL: UPPER INSTRUMENT PANEL: REASSEMBLY

REASSEMBLY

1. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)
2. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (for Automatic Light Control System)
3. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

4. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY






6. INSTALL NO. 3 HEATER TO REGISTER DUCT
(a) Install the duct with the 2 screws.






7. INSTALL NO. 2 HEATER TO REGISTER DUCT
(a) Install the duct with the screw.






8. INSTALL NO. 1 HEATER TO REGISTER DUCT
(a) Install the duct with the screw.






9. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
(a) Install the duct with the 3 screws.






10. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
(a) Install the duct with the 3 screws.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.