Scan Tool Testing and Procedures

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. DATA LIST
HINT: Using Techstream to read the DATA LIST allows values or status of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
CAUTION: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect Techstream to the DLC3.
(b) Turn the ignition switch on (IG).
(c) Turn on Techstream.
(d) Enter the following menus.
(1) Select: Body / D-Door Motor / DATA LIST.

D-Door Motor:





(2) Select: Body / Main Body / DATA LIST.

Main Body:





2. ACTIVE TEST
HINT: Using Techstream to perform ACTIVE TESTS allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. DATA LIST information can be displayed while performing ACTIVE TESTS.

(a) Connect Techstream to the DLC3.
(b) Turn the ignition switch on (IG).
(c) Turn on Techstream.
(d) Enter the following menus.
(1) Select: Body / D-Door Motor / Active Test.

D-Door Motor:





(2) Select: Body / Main Body / Active Test.

Main Body: