Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2007HIGHLANDER 4WD L4-2.4L (2AZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCRANKSHAFT, ENGINE
2007 Toyota Highlander 4WD L4-2.4L (2AZ-FE)
Crankshaft, Engine
2007 Toyota Highlander 4WD L4-2.4L (2AZ-FE)SECTION Crankshaft, Engine
Crankshaft
Standard thrust clearance 0.040 to 0.240 mm (0.0016 to 0.0094 in.)
Maximum thrust clearance 0.30 mm (0.0118 in.)
Thrust washer thickness 1.930 to 1.980 mm (0.0760 to 0.0780 in.)
Standard thrust clearance 0.040 to 0.240 mm (0.0016 to 0.0094 in.)
Maximum thrust clearance 0.30 mm (0.0118 in.)
Thrust washer thickness 1.930 to 1.980 mm (0.0760 to 0.0780 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.