Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2007HIGHLANDER 2WD V6-3.3L (3MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE LUBRICATIONOIL PAN, ENGINE
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)
Oil Pan, Engine
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)SECTION Oil Pan, Engine
OIL PAN SUB-ASSEMBLY
Install the oil pan No. 1 with the 15 bolts and 2 nuts. Tighten the bolts uniformly in several steps.
Torque:
10 mm head 8.0 Nm (82 kgf-cm, 71 inch lbs.)
12 mm head 20 Nm (204 kgf-cm, 15 ft. lbs.)
OIL PAN SUB-ASSEMBLY NO.2
Install the oil pan No. 2 with the 10 bolts and 2 nuts.
Torque 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Install the oil pan No. 1 with the 15 bolts and 2 nuts. Tighten the bolts uniformly in several steps.
Torque:
10 mm head 8.0 Nm (82 kgf-cm, 71 inch lbs.)
12 mm head 20 Nm (204 kgf-cm, 15 ft. lbs.)
OIL PAN SUB-ASSEMBLY NO.2
Install the oil pan No. 2 with the 10 bolts and 2 nuts.
Torque 8.0 Nm (82 kgf-cm, 71 inch lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.