Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2007HIGHLANDER 2WD V6-3.3L (3MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON RING, ENGINE
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)
Piston Ring, Engine
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)SECTION Piston Ring, Engine
Piston ring
Piston ring groove clearance
No. 1 0.03 to 0.08 mm (0.0012 to 0.0031 in.)
No. 2 0.02 to 0.06 mm (0.0008 to 0.0024 in.)
Oil 0.03 to 0.11 mm (0.0011 to 0.0043 in.)
Specified end gap
No. 1 0.30 to 0.95 mm (0.0118 to 0.0031 in.)
No. 2 0.50 to 1.05 mm (0.0008 to 0.0024 in.)
Oil (Side rail) 0.15 to 1.00 mm (0.0012 to 0.0043 in.)
Piston ring groove clearance
No. 1 0.03 to 0.08 mm (0.0012 to 0.0031 in.)
No. 2 0.02 to 0.06 mm (0.0008 to 0.0024 in.)
Oil 0.03 to 0.11 mm (0.0011 to 0.0043 in.)
Specified end gap
No. 1 0.30 to 0.95 mm (0.0118 to 0.0031 in.)
No. 2 0.50 to 1.05 mm (0.0008 to 0.0024 in.)
Oil (Side rail) 0.15 to 1.00 mm (0.0012 to 0.0043 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.