Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2007HIGHLANDER 2WD V6-3.3L (3MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLBRAKE ROTOR/DISC
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)
Brake Rotor/Disc
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)SECTION Brake Rotor/Disc
FRONT BRAKE
Front brake disc thickness
Standard thickness 28.0 mm (1.102 in.)
Minimum thickness 26.0 mm (1.024 in.)
Front brake disc runout Maximum disc runout 0.05 mm (0.0020 in.)
REAR BRAKE
Rear brake disc thickness
Standard thickness 10.0 mm (0.394 in.)
Minimum thickness 8.5mm (0.335 in.)
Rear brake disc runout Maximum disc runout 0.15 mm (0.0059 in.)
Front brake disc thickness
Standard thickness 28.0 mm (1.102 in.)
Minimum thickness 26.0 mm (1.024 in.)
Front brake disc runout Maximum disc runout 0.05 mm (0.0020 in.)
REAR BRAKE
Rear brake disc thickness
Standard thickness 10.0 mm (0.394 in.)
Minimum thickness 8.5mm (0.335 in.)
Rear brake disc runout Maximum disc runout 0.15 mm (0.0059 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.