Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2007HIGHLANDER 2WD V6-3.3L (3MZ-FE)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYSERVICE AND REPAIRREMOVAL AND REPLACEMENT
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)
Removal and Replacement
2007 Toyota Highlander 2WD V6-3.3L (3MZ-FE)SECTION Removal and Replacement
Integration Control And Panel:
Integration Control And Panel:
INTEGRATION CONTROL AND PANEL
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY
2. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Remove the 6 bolts.
b. Release the connector and remove the integration control and panel assembly.
3. REMOVE RADIO RECEIVER ASSEMBLY
HINT:
- w/o Navigation System:
- w/ Navigation System:
INSTALLATION
1. INSTALL RADIO RECEIVER ASSEMBLY
HINT:
- w/o Navigation System:
- w/ Navigation System:
2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Engage the connector and install the integration control and panel assembly.
b. Install the 6 bolts.
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.