2TR-FE Fuel: SST

2006 Toyota Tacoma Base, 4D Pickup, StandardSECTION SST
SST TABLE - 2TR-FE FUEL

G04406454Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09268-41048 Injection Measuring Tool Set
G04406455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41091) No.7 Union
G04406456Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41110) Adaptor
G04406457Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41120) 3 Way
G04406458Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41310) Clamp
G04406459Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41500) Fuel Tube Connector
G04406460Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(90467-13001) Clip
G04406461Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(95336-08070) Hose
G04406462Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09268-45014 EFI Fuel Pressure Gauge
G04406463Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41200) Gauge
G04406464Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41220) Hose
G04406465Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09268-41250) T Joint
G04406466Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09808-14020 Retainer Tool, Fuel Pump
G04406467Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09808-01410) Holder
G04406468Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09808-01420) Claw
G04406469Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09808-01430) Bolt
G04406470Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09842-30080 Wire H EFI Inspection
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.