Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006SIENNA FWD V6-3.3L (3MZ-FE)REPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONMANUFACTURER CODE CHARTSDTC 22VEHICLE STABILITY CONTROL SYSTEM
2006 Toyota Sienna FWD V6-3.3L (3MZ-FE)
Vehicle Stability Control System
2006 Toyota Sienna FWD V6-3.3L (3MZ-FE)SECTION Vehicle Stability Control System
DTC C0236/22 SFL Solenoid Circuit
DESCRIPTION
This solenoid goes on when signals are received from the ECU and controls the pressure acting on the wheel cylinders to control the braking force.
INSPECTION PROCEDURE
DESCRIPTION
DTC Detection Condition:
This solenoid goes on when signals are received from the ECU and controls the pressure acting on the wheel cylinders to control the braking force.
Wiring Diagram:
Step 1:
Step 1(contd.):
INSPECTION PROCEDURE
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.