Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006SEQUOIA 4WD V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYSYSTEM SPECIFICATIONS
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)
System Specifications
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)SECTION System Specifications
Cylinder Head Bolts
First Pass 40 Nm (408 kgf-cm, 30 ft. lbs.)
Second Pass 90°
Final Pass 90°
Surface Variation
Maximum Warpage 0.10 mm (0.0039 inch)
Intake Manifold Bolts And Nuts 18 Nm (185 kgf-cm, 13 ft. lbs.)
Camshaft Bearing Cap Bolts (LH)
Bolt Lengths
A with seal washer 94 mm (3.70 inch)
B with seal washer 72 mm (2.83 inch)
C 25 mm (0.98 inch)
D 52 mm (2.05 inch)
E 38 mm (1.50 inch)
Bolt C 7.5 Nm (76 kgf-cm, 66 inch lbs.)
Others 16 Nm (160 kgf-cm, 12 ft. lbs.)
Camshaft Bearing Cap Bolts (RH)
Bolt Lengths
A with seal washer 94 mm (3.70 inch)
B with seal washer 72 mm (2.83 inch)
C 25 mm (0.98 inch)
D 52 mm (2.05 inch)
E 38 mm (1.50 inch)
Bolt C 7.5 Nm (76 kgf-cm, 66 inch lbs.)
Others 16 Nm (160 kgf-cm, 12 ft. lbs.)
Camshaft Pulley Bolts 8.1 Nm (83 kgf-cm, 72 inch lbs.)
NEW Exhaust Manifold Nuts 44 Nm (450 kgf-cm, 32 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.