Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006SEQUOIA 4WD V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSA/T - PARK/NEUTRAL SWITCH INSTALLATION
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)
A/T - Park/Neutral Switch Installation
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)SECTION A/T - Park/Neutral Switch Installation
T-SB-0049-11
May 31, 2011
ATM Manual Shift Lever / Park Neutral Position Switch Installation
Service Category
Drivetrain
Section
Automatic Transmission/Transaxle
Market
USA
Applicability
Introduction
The purpose of this TSB is to provide information regarding transmission and/or Park Neutral position switch installation. If the manual shift lever is rotated prior to installing the Park Neutral position switch the detent spring may become detached from the manual shift lever. Use the information in this bulletin when installing an automatic transmission and/or Park Neutral position switch assembly.
Warranty Information
Installation Tips
^ When performing automatic transmission/Park Neutral position switch service on the models listed above take care that the manual shift lever is NOT rotated prior to installing the Park Neutral position switch.
^ If the manual shift level is rotated without the Park Neutral position switch installed the detent spring may become detached from the manual shift lever. See Figures 1 and 2.
^ If the detent spring becomes detached from the manual shift lever remove the detent spring and reinstall on the manual shift lever. See Figures 1 and 2.
May 31, 2011
ATM Manual Shift Lever / Park Neutral Position Switch Installation
Service Category
Drivetrain
Section
Automatic Transmission/Transaxle
Market
USA
Applicability
Introduction
The purpose of this TSB is to provide information regarding transmission and/or Park Neutral position switch installation. If the manual shift lever is rotated prior to installing the Park Neutral position switch the detent spring may become detached from the manual shift lever. Use the information in this bulletin when installing an automatic transmission and/or Park Neutral position switch assembly.
Warranty Information
Installation Tips
^ When performing automatic transmission/Park Neutral position switch service on the models listed above take care that the manual shift lever is NOT rotated prior to installing the Park Neutral position switch.
^ If the manual shift level is rotated without the Park Neutral position switch installed the detent spring may become detached from the manual shift lever. See Figures 1 and 2.
^ If the detent spring becomes detached from the manual shift lever remove the detent spring and reinstall on the manual shift lever. See Figures 1 and 2.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.