Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006SEQUOIA 4WD V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSINFORMATION BUSDESCRIPTION AND OPERATIONMULTIPLEX COMMUNICATION SYSTEM - CAN BUS
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)
Multiplex Communication System - CAN Bus
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)SECTION Multiplex Communication System - CAN Bus
System Outline
CAN has two lines as a pair which make communication with operating voltage. CAN has excellent data speed and error detecting capacity. It consists of vehicle control systems such as engine control module, data link connector 3, translate ECU, skid control ECU with actuator and suspension control ECU.
- Optional equipment
This system is working for the following systems:
- ABS
- Cruise Control
- Electric Modulated Air Suspension
- Electronically Controlled Transmission and A/T Indicator
- Engine Control
- TRAC
- VSC
CAN has two lines as a pair which make communication with operating voltage. CAN has excellent data speed and error detecting capacity. It consists of vehicle control systems such as engine control module, data link connector 3, translate ECU, skid control ECU with actuator and suspension control ECU.
- Optional equipment
This system is working for the following systems:
- ABS
- Cruise Control
- Electric Modulated Air Suspension
- Electronically Controlled Transmission and A/T Indicator
- Engine Control
- TRAC
- VSC
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.