Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006SEQUOIA 4WD V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISBODY AND FRAMEMIRRORSMEMORY POSITIONING SYSTEMSDESCRIPTION AND OPERATIONREMOTE CONTROL MIRROR WITH DRIVING POSITION MEMORY
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)
Remote Control Mirror With Driving Position Memory
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)SECTION Remote Control Mirror With Driving Position Memory
System Outline
When the ignition SW is turned on, the outer mirrors can be operated. When the remote control mirror SW is operated, a signal is input to the body ECU, and the outer mirror can be adjusted to the desired position.
In this system, the position sensor detects the number of rotations of each motor (Movement amount of each mirror) and inputs it to the driver door ECU and front passenger door ECU. This makes it possible to store and recall the outer mirror position using the driving position memory SW. The outer mirror position is stored and recalled through communication control of the body ECU.
When the ignition SW is turned on, the outer mirrors can be operated. When the remote control mirror SW is operated, a signal is input to the body ECU, and the outer mirror can be adjusted to the desired position.
In this system, the position sensor detects the number of rotations of each motor (Movement amount of each mirror) and inputs it to the driver door ECU and front passenger door ECU. This makes it possible to store and recall the outer mirror position using the driving position memory SW. The outer mirror position is stored and recalled through communication control of the body ECU.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.