Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006SEQUOIA 4WD V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTANTITHEFT AND ALARM SYSTEMSKEYLESS ENTRYTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESACTIVE TEST
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)
Active Test
2006 Toyota Sequoia 4WD V8-4.7L (2UZ-FE)SECTION Active Test
ACTIVE TEST
HINT: Performing the ACTIVE TEST using the intelligent tester allows the relays, actuators and so on to operate without parts removal. Performing the ACTIVE TEST as a first step of troubleshooting is one of the methods to shorten labor time.
It is possible to display the DATE LIST during the ACTIVE TEST.
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch ON.
c. According to the display on the tester, perform the "ACTIVE TEST".
HINT: Performing the ACTIVE TEST using the intelligent tester allows the relays, actuators and so on to operate without parts removal. Performing the ACTIVE TEST as a first step of troubleshooting is one of the methods to shorten labor time.
It is possible to display the DATE LIST during the ACTIVE TEST.
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch ON.
c. According to the display on the tester, perform the "ACTIVE TEST".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.