Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2006RAV4 4WD L4-2.4L (2AZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSTRANSFER CASESYSTEM SPECIFICATIONS
2006 Toyota RAV4 4WD L4-2.4L (2AZ-FE)
System Specifications
2006 Toyota RAV4 4WD L4-2.4L (2AZ-FE)SECTION System Specifications
OIL CAPACITY, L (US. qt., Imp. qt.): 0.5 (0.5, 0.4)
OIL TYPE: Hypoid gear oil API GL-5
RECOMMENDED OIL VISCOSITY:
Above -18°C (0°F): SAE 90
Below -18°C (0°F): SAE 80W or 80W-90
OIL TYPE: Hypoid gear oil API GL-5
RECOMMENDED OIL VISCOSITY:
Above -18°C (0°F): SAE 90
Below -18°C (0°F): SAE 80W or 80W-90
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.