2005 Toyota Avalon XLSFACTORY OEM SERVICE PROCEDURE

System Description

  1. SMART KEY SYSTEM DESCRIPTION 
    1. In addition to conventional mechanical key and wireless door lock remote control functions, the smart key system enables door to lock/unlock, steering lock to release, engine to start and luggage compartment to open without operating the key. The only requirement is that the key be in the driver's possession.
      • This system is controlled by the certification ECU. When the certification ECU detects the presence of the smart key system in one of the action area, it identifies and checks the ID code, and outputs operation signals to the related ECU in accordance with their functions.
      • The detection areas are formed by 8 oscillators (4 door oscillators, 2 luggage compartment oscillators, and 2 cabin oscillators).
  2. ACTION AREA 
    Fig 1: Identifying Smart Key System Action Area
    G02977067Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Precautions for the entire system:
      • Be sure to carry the key during inspection of the smart key system.
      • The key detection area may become small, or the key may not be detected correctly, in the following conditions (As weak radio waves are used to detect the key).
        1. The battery is dead.
        2. Any facilities that generate strong radio waves, such as a TV tower, power plant or broadcast station, are located near the inspection site.
        3. Any wireless applications such as a cellular phone are carried with the key.
        4. The key is in contact or covered with metal.
        5. A radio wave keyless entry system is operated near the inspection site.
        6. The key is located near the device that generates high voltage or noise.
      • The key may be difficult to operate for some reason relating to the vehicle body shape.
      • The key may not be detected correctly if it is around the vehicle's windows, the door handle or center of the bumper even when it is in the detection area outside the vehicle.
      • The key may not be detected correctly if it is on the instrument panel, rear tray or floor, or in the glove box even when it is in the detection area inside the vehicle.
      • The engine cannot be started even when the key is in the detection area inside the luggage compartment.
      • The key may not operate if the key is not held properly.
      • The key emits a weak radio wave. If using a pacemaker, be sure to read the manual of the pacemaker before using the key because this radio wave may affect it.
      • The smart key system does not operate in the following conditions:
        1. The smart key system is cancelled (For detail, see REPLACEMENT ).
        2. The key battery is completely dead (The indicator does not blink by pushing any of the buttons on the key) (For details, see ON-VEHICLE INSPECTION ).
  3. FUNCTION OF MAIN COMPONENTS 
    Fig 2: Smart Key System Main Components Function Chart (1 Of 2)
    G02977068Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.