Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA20054RUNNER SPORT, 4.7 T, RWDREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOW CONTROL SYSTEM - DIAGNOSTICSMANUAL UP/DOWN FUNCTION DOES NOT OPERATE ON DRIVER SIDEINSPECTION PROCEDURE

2005 Toyota 4Runner Sport, 4.7 T, RWD

Inspection Procedure

2005 Toyota 4Runner Sport, 4.7 T, RWDSECTION Inspection Procedure

INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSY
1. Remove the master switch.
2. Check the continuity between the terminals of the switch connector when the AUTO switch is operated.
  
  Fig 1: Power Window Regulator Master Switch Assy Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.