Disc Player ASSY: Replacement

2005 Toyota 4Runner SR5, 4.7 T, AWDSECTION Replacement

HINT:

COMPONENTS 

  1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 2 (See  REPLACEMENT  ) 
  2. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSY (See  REPLACEMENT  ) 
  3. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSY (See  REPLACEMENT  ) 
  4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO. 2 (See  REPLACEMENT  ) 
  5. REMOVE DISC PLAYER ASSY 
    1. Remove the 4 bolts.
    2. Disengage the 4 claws of disc player assy.
    3. Disconnect the connectors and remove the disc player assy.
    Fig 1: Removing Disc Player Assy
    G02574141Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL DISC PLAYER ASSY 
    1. Connect the connectors.
    2. Engage the 4 claws of disc player assy and install the disc player assy with the 4 bolts.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.