Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA20054RUNNER SR5, 4.7 T, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSTHEFT DETERRENT & DOOR LOCKPOWER DOOR LOCK CONTROL SYSTEMINSPECTION

2005 Toyota 4Runner SR5, 4.7 T, AWD

Power Door Lock Control System: Inspection

2005 Toyota 4Runner SR5, 4.7 T, AWDSECTION Inspection

INSPECT FRONT DOOR W/MOTOR LOCK ASSY LH
1. Apply battery voltage and inspect operation of the door lock motor.
  Standard:
  
  Fig 1: Measurement Condition And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If operation is not as specified, replace the door lock assy.
  
  Fig 2: Inspecting Front Door W/Motor Lock Assy LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Inspect the door lock and unlock switch continuity.
  Standard:
  
  Fig 3: Terminal No, Door Lock Position And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the continuity is not as specified, replace the door lock assy.
3. Inspect the position switch continuity.
  Standard:
  
  Fig 4: Terminal No, Door Lock Position And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the continuity is not as specified, replace the door lock assy.
  
  Fig 5: Inspecting Door Lock And Unlock Switch Continuity
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT FRONT DOOR W/MOTOR LOCK ASSY RH
1. Apply battery voltage and inspect operation of the door lock motor.
Standard:

Fig 6: Measurement Condition And Specified Condition Chart
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If operation is not as specified, replace the door lock assy.

Fig 7: Inspecting Front Door W/Motor Lock Assy RH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT REAR DOOR W/MOTOR LOCK ASSY LH
1. Apply battery voltage and inspect operation of the door lock motor.
  Standard:
  
  Fig 8: Measurement Condition And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the operation is not as specified, replace the door lock assy.
2. Inspect the position switch continuity.
  Standard:
  
  Fig 9: Terminal No, Door Lock Position And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the continuity is not as specified, replace the door lock assy.
  
  Fig 10: Inspecting Rear Door W/Motor Lock Assy LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT REAR DOOR W/MOTOR LOCK ASSY RH
1. Apply battery voltage and inspect operation of the door lock motor.
  Standard:
  
  Fig 11: Measurement Condition And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If operation is not as specified, replace the door lock assy.
2. Inspect the position switch continuity.
  Standard:
  
  Fig 12: Terminal No, Door Lock Position And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the continuity is not as specified, replace the door lock assy.
  
  Fig 13: Inspecting Rear Door W/Motor Lock Assy Rh
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT W/MOTOR BACK DOOR LOCK ASSY
1. Check operation of the door lock.
  1. Using a screwdriver, push the latch in order to put the back door lock in the locked condition (full-latch position).
  2. Connect the positive (+) lead to terminal 1 and the negative (-) lead to terminal 2. Then, check operation of latch.
    Standard: The latch turns to the open-latch position
  3. Inspect motor operation when battery voltage is applied to the terminals.
    Standard:
    
    Fig 14: Measurement Condition And Specified Condition Chart
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    If the operation is not as specified, replace the door lock assy.
    
    Fig 15: Inspecting W/Motor Back Door Lock Assy
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check the back door courtesy switch continuity.
  1. Check the continuity between the terminals of the courtesy switch.
  Standard:
  
  Fig 16: Door Lock Latch Position, Terminal No And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the continuity is not as specified, replace the door lock assy.
3. Check the back door latch switch continuity.
  1. Check the continuity between the terminals of the latch switch.
  Standard:
  
  Fig 17: Door Lock Latch Position, Terminal No And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the continuity is not as specified, replace the door lock assy.
4. Check the position switch continuity.
  1. Connect the battery positive (+) lead to connector terminal 1 and the negative (-) lead to connector terminal 2.
  Standard:
  
  Fig 18: Door Lock Latch Position, Terminal No And Specified Condition Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the continuity is not as specified, replace the door lock assy.
  
  Fig 19: Identifying Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSY
1. Inspect the door lock control switch continuity.
Standard:

Fig 20: Terminal No, Switch Position And Specified Condition Chart
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the switch assy.

Fig 21: Inspecting Power Window Regulator Master Switch Assy
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT DOOR CONTROL SWITCH ASSY
1. Passenger side switch:
  Inspect the door lock control switch continuity.
Standard:

Fig 22: Terminal No, Switch Position And Specified Condition Chart
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the switch assy.

Fig 23: Inspecting Passenger Side Switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT BACK DOOR OPENER SWITCH ASSY
1. Inspect the back door opener switch continuity.
Standard:

Fig 24: Terminal No, Switch Position And Specified Condition Chart
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the switch assy.

Fig 25: Inspecting Back Door Opener Switch Continuity
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002